6/12Volt Sealed Lead Acid Battery Charger

This charger is designed for use with 6V or 12V lead acid batteries. There is
a built-in polyswitch for over-current protection and polarity-reverse
protection. This ensures that the battery would not be damaged during
charging. A set of crocodile clips and, detachable output plugs are included
in our standard packing.

Instructions:
l.) Plug the detachable plug or the crocodile clips into the output lead of the charger.
2) Plug the unit into mains supply and the red LED lights
3.) Select the appropriate battery voltage (6V/12V) through the voltage selector on the the unit.
4) Connect the crocodile clips to the appropriate terminals on the battery, or plug the detachable plugs into the battery pack if it has this type of socket.
5.) The charging process commences.

Warnings:
l.) Do not use the unit in outdoor area or in area of high humidity.
2) Use this charger with 6V or 12V lead acid batteries only.

Technical Specification:
Input Voltage: 230V AC ~50Hz
Output Voltage: 6V/12V DC
Output Current: 50OmA, 6.0VA (max.)